Metal Siding Painting Advice

Painting metal and aluminum siding can become a nightmare if not done right. Over the years I have worked on and repaired many homes with metal siding. Metal siding is real common in mobile homes. Most older mobile homes use aluminum paneling for their exterior siding.

Most painted metal siding seems to last at least 20 years. The reason for this is the paint is baked on in a factory giving it a high quality and nice looking surface. This baked on method is used for painting aluminum and most metals siding that gives the product a long life.

I lived in a mobile home park for a few years and my next door neighbor's mobile home had never been painted and was over 45 years old. He would go out and washed the mobile home once a year with some TSP soap while using a brush on the end of an extension pole to clean the home.

His mobile home might not have looked brand new but it was definitely in great shape. Over the years he had developed a few scratches and some dirt that was hard to wash off but that was about the extent of the damage to the painted metal siding.

Well we painted our mobile home and used an expensive metal primer along with some expensive paint from Dunn Edwards & Co... This paint worked great. We lived there for around four years and never had any problems once the home was painted. Having been in the construction business I knew we had to use a good metal paint primer in order for the paint to stick to the baked on paint process for the metal siding to look good.

Here's my advice to you when painting metal siding.

1. Make sure the metal siding is clean. Use TSP soap along with a scrub brush and scrub that baby clean. The cleaner the metal surface the better the new paint primer will stick or adhere to the old paint.
2. Follow the instructions carefully on the paint primer can when applying the primer. Do not paint below or above the recommended paint temperatures.
3. Make sure you explain to the paint salesman at whatever store you're in that you are going to be painting metal siding. Get the right paint primer.
4. I would love to recommend a paint primer but cannot because I don't want to get a phone call from anyone a few years from now telling me the paint is peeling off of their home. Let that responsibility become the paint manufacturers.
5. Let the paint primer dry for the recommended time as per the directions on the paint primer can. I prefer letting the paint dry at least one week. The reason for this is some paint primer's stay soft for a while and if you paint over them immediately they doesn't seem to bond as good and sometimes will stay soft for a long period of time.
6. Apply your final coats of paint following the manufacturer's instructions on the paint can.

There you have it painting metal siding is all in the preparation of the surface you are painting.

Have fun painting and always read and follow the manufacturer's recommended instructions for the products you are using. These people test their products constantly and know the best way to apply them to any surface.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on different Types Of House Siding

Home Basement Books
Brick Veneer Damage Around Vent

Ceramic Floor Tile Installation - 5 Tips For Success

Ceramic floor tile installation is a great way to get a long-lasting beautiful floor. There are several tricks to getting a great looking floor tile job though. Really getting off to the right start is key to a good looking floor. Get started right and you'll be pleased with the results.

The right start begins with the base over which you install the tile. You see tile can be installed over all kinds of materials. You can put tile over plywood, concrete, vinyl flooring or even over other ceramic tile. But the one must is that the surface must be stable. It can't be flexible and it can't bend. That's because the tile floor will crack if the underlying layers moves. Often the first step in a professional tile installation is installation of a layer of cement board. That often guarantees a rigid surface.

That solid base is part of the planning of a tile project. Planning and design of a tile project is a big part of a successful installation. Before that first tile is laid, check the squareness of the room. Have you ever seen a perfectly square room? You want to work from the best corner and plan to put he cut tiles in the least visible spot. Plan for where the cuts will be to get the best results.

Once you get started, the goal is to keep the tile spacing as even as possible. Tile spacers in the right width are the best tell to get this done. Also a simple carpenter square helps to keep a close check to maintain alignment. Often nailing down some straight guide boards, batten boards, is another helpful move. Especially for the first row of tiles, a guide board can help get you off to the right start.

At one or more walls you will cut the border tiles to fit the remaining space. Now cutting is one of the skills a tile setter gets to practice. You'll need tile nippers for small trim work and probably a wet tile saw. Sometimes on a floor job with just straight cuts, a cutter board may be all you need. This tool scores a tile with a groove so it can be easily broken. It takes a little practice to break the tile on the line.

Grouting the joints is the finishing step. Grout comes in several types. Some are acrylic. Some are masonry. Some are epoxy. The epoxy grout is really waterproof and is especially well suited in bathrooms to keep water from soaking into the floor.

Ceramic floor tile installation requires quite a bit of planning. A well planned job will result in the best looking floor with the minimum of waste. Ceramic floors also are a great place to show creativity in mixing tiles into patterns. There are some tricks to getting a tile floor just right. If you get a chance, it helps to watch a pro work on a job or two.

You can get access to video tutorials showing a master installer do ceramic floor tile installation in several different rooms at our website.

Al Bullington invites you to visit http://InstallingCeramicTile.net for answers to your tile questions.

What Does a GFI Do

In your bathroom you should have a GFI electrical outlet. Most new homes or newly remodeled homes require you to have GFI electrical outlets in the kitchen. Most older kitchens do not have GFI electrical outlets. GFI stands for ground fault circuit interrupter.

Why not call it a GFCI instead of a GFI electrical outlet? Well it is called a GFCI in some instances. GFI is short and is the most common name used by most electricians and builders for this type of outlet.

GFI 's come in 15 amp and 20 amperage outlets. GFI outlets must be wired properly. Make sure you're using the proper wire size when hooking up the GFI outlet.

How do I know which size wire to use? This all depends on how far away you are running it from the electrical panel. There are charts you can use to figure this out. If you are not running the electrical wire more than 80 feet from the electrical panel you can use 12 gauge electrical wires for a 20 amp GFI. This is a general rule of thumb for most electrical house wiring.

If you're going to be using a 15 amp GFI and you are going to be less than 80 feet away from the electrical panel you can use 14 gauge electrical wires. Again this is just a general rule of thumb for most electrical house wiring.

A GFI is a light duty electrical plug used in bathrooms, kitchens and the exterior of your house. The sole purpose of the GFI is to shut the breaker off faster if there is any moisture or light load problems.

Let's say for instance you have your hair dryer plugged into the GFI outlet. The hair dryer somehow falls into the sink while it is on or plugged in. The GFI outlet will instantly shut off because of the sensitivity of the breaker inside of the plug it self.

The GFI plug has a test button and a reset button on it. If you are continually resetting the GFI you will wear it out eventually. I have had GFI plugs after resetting the button about 10 times break and no longer able to use them.

The GFI electrical plug is a great idea and if you don't have them in your bathroom or outside of your home it would be a great idea to have an electrician install them for you.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Home Building Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

San Diego Termite Damage

New Insulation Crawl Space

Repairing a Leaking Toilet - Home Repairs

Let me explain how a toilet works. First when you go to flush the toilet a little arm pulls a rubber flapper up and lets the water drain into the toilet bowl. The water draining into the toilet bowl forces the old water out along with the number two or number one waste and extremities.

If the toilet sounds like it is running there is a good chance that the seal between the rubber flapper and the plastic rain at the bottom of the toilet is broken somehow. The sound you are hearing is water running around this ring and in to the toilet bowl.

This leak is actually causing no damage to the toilet itself but is wasting water. Hence the water bill will be a little higher if you don't fix the leaking toilet. The best way to find out if this is actually your problem is to take the toilet tank lid off. Then stick your hand down into the toilet bowl and press gently on the rubber flap.

If the water stops leaking or starts running faster this is your problem. Turn the water off to the toilet. There will be a shut off valve on the wall under your toilet bowl in the bathroom. After you turn the water off removed the plastic flap and examine it.

You will be looking for a warped toilet flap or of some sort or grooves on the flapper itself. Take the toilet flapper down to your local home improvement store and buy a new one. Go home and replace the new toilet flapper and this should solve 90% of your leaking toilet problems.

There is one more thing it could be. With the toilet tank lid off, check to see if water is overflowing into the little round plastic pipe. This plastic pipe should have a small hose running from the float valve assembly into it.

If the water is over flowing from the toilet tank into this little plastic pipe you will need to adjust the float.

First thing you will need to do is while the toilet is running lift up on the float lever arm. If the water stops you can simply bend the metal arm of the float lever. The purpose of bending the arm will force the float deeper into the water there for stopping the water from rising over the small tube in the center of your toilet.

There are few parts to a toilet and most parts can be purchased at your local hardware or home improvement centers. Toilet repairs like this can be made simple and the parts used to replace are inexpensive.

Happy Toilet Repairing.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more House Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Some Great Plumbing Ideas

Brick Patch Under Window

Foundation Waterproofing

Most people who build a new home with a basement plan on making it an added living space. New homeowners want to install a large screen TV, a pool table or maybe another bedroom. They expect that their basement will be dry and free of water. But what they don't know is that it may be possible that their basements are not waterproof.

Water vapor that gets into a basement causes the musty odors that you smell in a basement. Any liquid water that gets into a basement can damage carpets, drywall and any insulation that is installed inside the basement. And it can cause mold to grow.

First the Basics

Not all foundation coatings are waterproofing. When foundations are built, many are coated with what is called dampproofing. This is a bituminous asphalt membrane that is black in appearance. While it has been used for decades, it does not truly waterproof a basement. Dampproofing can stop water vapor, but that is it. Dampproofing cannot stop liquid water from getting through the foundation walls and into the basement.

Foundation Waterproofing Membranes

According to the ICC-ES, a non-profit public benefit corporation that evaluates products and sets performance criteria for the residential building market, waterproofing must do three things. First, it must stop water vapor. This gaseous form of water is released by the surrounding soils and can move through the foundation walls and into the basement.

Secondly, waterproofing membranes must be able to stop liquid water under hydrostatic pressure. In easy to understand terms, hydrostatic pressure is the force exerted by liquid water that is in the soil. You can think of it just like the water in a water tower. The taller the soil and therefore the higher the water column in it, the greater the hydrostatic pressure against your foundation. Also, the amount of water that is in the soil itself can affect the amount of hydrostatic pressure. The greater the amount of water in the ground, the higher the hydrostatic pressure exerted against the foundation.

Third and most important is that waterproofing must span a crack in a foundation. Foundations crack as a normal process of concrete curing, and if that crack is not sealed against water intrusion, it can leak when it rains.

Why Dampproofing will not Stop Water

Dampproofing does not have the ability to stop liquid water under hydrostatic pressure. This is because it goes on very thin, only 10 mils thick in some cases. Water under hydrostatic pressure can go right through it.

Because the dampproofing is brittle and has no flexibility, it cannot span a crack in a foundation. When the foundation cracks, so does the dampproofing. Therefore, liquid water can penetrate into the basement area.

The terms waterproofing and dampproofing are incorrectly used interchangeably. So, when you are building your new home, be sure that your builder is using a quality waterproofing membrane. It will give years of protection and effectively give you a larger living space that will stay dry and keep your finished basement safe from water.

This article is written by Aaron Kuertz who's with Applied Technologies, LLC. Aaron has been in the waterproofing industry since 1998. Applied Technologies is a manufacturer and supplier to professional waterproofing contractors and homeowners in the United States. For more information about foundation waterproofing visit Applied Technologies on the web.

Foundation Waterproofing

Most people who build a new home with a basement plan on making it an added living space. New homeowners want to install a large screen TV, a pool table or maybe another bedroom. They expect that their basement will be dry and free of water. But what they don't know is that it may be possible that their basements are not waterproof.

Water vapor that gets into a basement causes the musty odors that you smell in a basement. Any liquid water that gets into a basement can damage carpets, drywall and any insulation that is installed inside the basement. And it can cause mold to grow.

First the Basics

Not all foundation coatings are waterproofing. When foundations are built, many are coated with what is called dampproofing. This is a bituminous asphalt membrane that is black in appearance. While it has been used for decades, it does not truly waterproof a basement. Dampproofing can stop water vapor, but that is it. Dampproofing cannot stop liquid water from getting through the foundation walls and into the basement.

Foundation Waterproofing Membranes

According to the ICC-ES, a non-profit public benefit corporation that evaluates products and sets performance criteria for the residential building market, waterproofing must do three things. First, it must stop water vapor. This gaseous form of water is released by the surrounding soils and can move through the foundation walls and into the basement.

Secondly, waterproofing membranes must be able to stop liquid water under hydrostatic pressure. In easy to understand terms, hydrostatic pressure is the force exerted by liquid water that is in the soil. You can think of it just like the water in a water tower. The taller the soil and therefore the higher the water column in it, the greater the hydrostatic pressure against your foundation. Also, the amount of water that is in the soil itself can affect the amount of hydrostatic pressure. The greater the amount of water in the ground, the higher the hydrostatic pressure exerted against the foundation.

Third and most important is that waterproofing must span a crack in a foundation. Foundations crack as a normal process of concrete curing, and if that crack is not sealed against water intrusion, it can leak when it rains.

Why Dampproofing will not Stop Water

Dampproofing does not have the ability to stop liquid water under hydrostatic pressure. This is because it goes on very thin, only 10 mils thick in some cases. Water under hydrostatic pressure can go right through it.

Because the dampproofing is brittle and has no flexibility, it cannot span a crack in a foundation. When the foundation cracks, so does the dampproofing. Therefore, liquid water can penetrate into the basement area.

The terms waterproofing and dampproofing are incorrectly used interchangeably. So, when you are building your new home, be sure that your builder is using a quality waterproofing membrane. It will give years of protection and effectively give you a larger living space that will stay dry and keep your finished basement safe from water.

This article is written by Aaron Kuertz who's with Applied Technologies, LLC. Aaron has been in the waterproofing industry since 1998. Applied Technologies is a manufacturer and supplier to professional waterproofing contractors and homeowners in the United States. For more information about foundation waterproofing visit Applied Technologies on the web.

Stair Building Books and Ideas

Where do we go to buy stair building books? Do we go to the major retailers like Amazon or Barnes & Noble? I have found over the years the information in most of these books I have purchased from these stores has a lot of fluff with very little common sense stair building application.

I bought one stair building book that had information on handrails. The front cover looked great and I thought this was going to be a great book reading the reviews from Amazon. When I finally got the book in the mail, I would say about one third of it was math tables for building elaborate wooden hand railing's. These tables were not easy to understand along with the rest of the book.

Back when I bought the book on building stair handrails it dawned on me that most of the construction workers I have met during my 30 years of working in the field were not very good outside of basic math. Now I knew a lot of carpenters that could read a measuring tape and use a framing square pretty good. But when it came to advanced geometrical construction projects like a stair hand railing system this was out of our league.

Reading this book or should I say parts of it gave me an idea to write a book of my own, starting with basic stair building I took all the fluff or the hard to understand advanced stair building applications out of my book, How to Build a Straight Set of Stairs.

I put a lot of time into creating an illustration for every possible part of building a simple set of stairs. I have probably built over 2000 sets of stairs during my lifetime and have explained and taught basic and advanced stair building to other carpenters. Understanding what parts of the stair construction process they understood, I was able to improve my skills as a stair building teacher.

Most people do not need advanced stair building skills to construct a simple straight set of stairs. If you are building a straight set of stairs and would like a stair building book with lots of easy to understand illustrations along with simplified directions you have found it.

We're building more stair building books to help contractors, carpenters, handymen and homeowners understand the stair building process.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Plastic Tarp On Roof

Bathroom Moisture Problems - Home Remodeling

Right above my bathtub in my master bathroom the paint is peeling off the wall. The area is peeling above the tile in my bathtub and shower combination. I tried to glue the peeling paint back and only made the situation worst.

First things first. The paint is peeling because there is to much moisture in the bathroom while you are using it. Do you have any windows you can open or a ventilating bathroom fan. If you have a window crack it open part way while you are showering.

The water droplets will accumulate on the walls and drip into any cracks. Right above the tile grout is a great place for moisture to accumulate. Oh yeah moisture loves grout and drywall. If you have any unpainted areas or an area that has cracked. Guess what you have now.

Your paint is peeling because the bathroom gets hot and cold. Moist and dry. If you have the door and windows shut. You just created a moisture trap. Most people prefer their privacy and will closes the door when using the shower. Well then open the window and let some cold air in while you are taking a nice warn shower. I don't think so. Most showering fools don't like that idea either.

Ok one more idea keep the windows shut so you don't let the cold air in. Then lock the door so no on barges in on you. If you have a ventilation fan turn it on. This will at least pull fresh air in from under the door and send the moist air out of the house.

But the fan is so noisy and I can't enjoy my nice warm vapor producing shower that will eventually cause me to get sick from mold particles floating around in the air while I am using my bathroom.
Does this about sum it up for you and don't we all do this from time to time. We want to enjoy our shower time, so we close up everything and when we are in our bath sauna environment relaxing our house is getting some damaging moisture that could cause mold and mildew.

Open a window or door a little when you shower. Get some air circulating through the bathroom and prevent damage to your nice house.

Put up with a little inconvenience for you homes sake and your pocket book.

Greg Vanden Berge has been in the home building and remodeling business in California for over 30 years. With this knowledge he has created a few websites that provide useful information for home owners as well as contractors. His main goal is to educate professionals in the home related businesses, dealing with problems that can easily be avoided with just a little bit of information.

His website provides all kinds of answers to remodeling and new house building in North San Diego Home Remodeling Carlsbad Home Remodeling

Visit us now for Bathroom Ideas

Installed Marvin Wood Windows

Remodel Instead of Selling Your Home - Home Tips

Why sell your home when you can remodel and create the home of your dreams

After living in your home for a long time, you may end up getting bored looking at the fixtures and decor of your home. The options you have for a change are to either sell the house and buy a new one, or a better option which is to remodel and create your dream home.

Buying a new home does not always prove to be a practical choice as you may have to shift the kids' school, spend more time commuting to your workplace, need more time getting accustomed to the stores and markets near you and of course, get your old home sold for the right price.

Keep your budget in mind

When remodeling your home, you will first have to keep your budget into consideration, if you have any additions or requirements to be added to your home and any particular style that you intend to implement in the house. The rooms that need most attention when remodeling are bathrooms and kitchens as these are the most used rooms, and have new accessories coming up that will make your rooms look much better than they were before.

Like if you lack a room for your kids or a guest room, consider adding this by perhaps adding an extra room to your home. You could consider transforming a basement to a game room or your garage into an apartment to give that extra space to your family.

If you like outdoor entertaining, you could consider adding a patio or deck to facilitate this. And if you are suddenly involved in becoming environmentally conscious, you could consider using environmentally friendly products in the remodeling of your home.

You get better rates by meeting neighborhood standards

Instead of just renovating and remodeling your home to your ideas and budget, with some research, you will be able to find out what changes will bring the best rate to your home in the future.

If you find out that your home is the only home that has only one bathroom, you could consider adding a bathroom to your home when remodeling. This is because if you can meet the neighborhood standard, you will be able to get a better rate for your home when selling it.

If you plan any additions to your home, make sure it is in proportion to the house. It should be an accent to the house, and not end up as a focal point. Your remodeling should always work to your benefit as it is not always that home buyers will like the house the way you have remodeled it.

Remodeling your home gets a better resale price

Remember that though you may be selling it in the future, you have to remodel it so that you are all comfortable in it till you sell it. It is not necessary to spend a fortune on remodeling; you can make quite an impact with a restricted budget.

Not only do you get a new home by remodeling your home, you also get extra years of pleasure, which may in turn increase the value of the home. This will fetch you a better price, if you intend to sell the house in the future.

James Tyler is the owner of Ace Builders, a residential remodeling company serving the Raleigh, North Carolina area. Tyler writes about issues relating to all types of remodeling and home improvement projects.

For more information, tips and advice visit http://www.acebuilders.net

Making Water and Gas Line Repair Easy

The water and gas lines that provide our homes with natural gas and potable water are essential to our everyday lives, but their importance is often overlooked until they need maintenance. Gas lines allow us to cook and heat our homes, and water lines bring clean, drinkable water into our homes to wash, cook and consume. While plumbing of one kind or another has been in existence for thousands of years, modern gas and water lines make our lives easier than ever. Because of this, it's vital that these lines are maintained properly and repaired when necessary.

Water and gas line repair can be an expensive venture, but you can save significant time and money by making sure that you approach the problem in the correct manner. First of all, never try to perform any kind of gas or water line repair if you are not a trained and licensed professional. Attempting to work on gas and water lines without experience can lead to serious damage, costly repairs and even injury to you or your family. Always call a professional whenever it comes to working on gas or water lines.

Secondly, make sure that you get more than one opinion when it comes to the best option to fix your broken gas or water lines. Because this field of work is not understood well by many homeowners, it is possible for some companies to charge more than necessary to fix the problem. There is nothing wrong with calling several different companies to diagnose your gas or water line problems and give you an estimate of what it will cost to fix things. Of course, you should only contact companies that provide free estimates.

Finally, you should always remember that it may be necessary for you to pay a substantial amount of money to fix your gas and water line problems. Once it has been established that your lines need to be repaired or replaced, you should never put it off if you have the money to fix the problem. By ignoring gas line and water line problems, you could put your home and even the health and safety of your family in jeopardy. While a fixing a clogged drain can be put off for several weeks, a broken gas or water line needs to be attended to as quickly as possible.

In the end, you will probably never experience any kind of gas or water line problem that will require you to spend your entire savings or take out a second mortgage. But being smart about how you tackle your gas or water line repair problem could save you plenty of time, money and stress when all is said and done.

Lorain County Sewer and Drain makes Gas and Water Lines repair simple and affordable. Visit our site today to learn more about basement waterproofing.

Home Improvement Ideas

Electric Fireplace

Majority of the houses being built since the early 1900's have fireplaces that are used to heat up the rooms in the house. The location of the fireplace is highly dependable on which part of the house they like holding conversation. Technology has phased out traditional fireplace in almost all houses in the cities. Instead, it has introduced the electric fireplace.

The main reason why people like it so much is because the hassle of wood, ashes, smoke and clearing up are non existent. Despite the fact that the fire produced cannot be used for cooking, it provides a fire that has the ability to keep people warm. Its popularity has increased due affordability, safety, convenience and the fact that it can fit anywhere in the house and making it available to anyone who would like to have it.

With the ability to be able the electric fireplace almost anywhere, does not require any special preparations like a chimney, fuel pipeline or a venting system either are also added advantages. This means that it can fit either in the bedroom, sun porch, foyer and kitchen. It also is a cost saving factor which means it is affordable for most people.

The materials used to make the electric fireplace are marble, brick and any other material of choice an individual may have. You can have it blend in with the theme of your house. Installation is very simple because people are able to do it for themselves, offers realistic simulations and all these makes it very user friendly.

Peter Gitundu Researches And Reports On Fireplaces. For More Information on Electric Fireplace, Visit His Site at ELECTRIC FIREPLACE. You Can Also Post Your Views About Electric Fireplace On My Blog Here ELECTRIC FIREPLACE

House Pocket Door Problems

Just a few months ago I went over to repair a pocket door that was closing at a weird angle. This was the first time I had ran into this sort of situation and was definitely confused. I got a flashlight and started looking inside the pocket door frame. I had a hard time finding the problem but when I did it was obvious.

As the pocket door was sliding closed it would work perfectly but when you went to open it the bottom of the door would stick out about an inch and a half passed the door jam. The problem turned out to be the track was missing a screw in the very back and as the door slid back into the frame the tracking would hang down at an angle from the weight of the door. There was no way to reach the screw because it was at that very back of the pocket door frame near the framing itself.

In order to fix the pocket door problem I was going to have to remove a good sized area of the plastered wall at the upper right hand corner of the pocket door frame. This was the only thing I could think of and would require a simple wall patch and some paint to make the repair complete.

This job took me about one hour to cut the hole and replaced the screw that had fallen out of the pocket door tracking. I then use some fast setting drywall plaster and some fiberglass drywall tape to repair the wall. This took another hour to finish the drywall properly.

Some pocket door problems are a little easier to repair than this one. Most pocket doors seemed to have problems sliding and eventually are left closed, never to be used again.

Painting the doors over and over again can actually add to the thickness of the door or excessive moisture in the home over long periods of time can also cause the door to swell preventing it from opening properly.

Painting the rollers themselves or the track that the rollers ride in can create a problem with rolling the door easily and effortlessly. If the pocket door rollers or tracking is damaged they will have to be repaired or replaced, obviously. Some people actually spray silicon on the rollers or grease the pocket door wheels and over time the track becomes caked with dried grease and dirt making the door hard to open and close

Here's one most people don't ever think about and yet I have faced this problem more than once. "The Dreaded Picture Hanger". Most people don't realize that the pocket door will not operate very well with a nail driven through it. I have had people complain about their pocket door not operating properly but they can wiggle it a little.

When I come upon a situation like this it usually just requires removing the nail that the picture is hung upon.

I have also seen instances where the home has been remodeled and new floor trim or door trim has been installed. The finish carpenter using his nail gun without changing to a shorter nail has himself nailed the pocket door shut. This could be a big problem because the nails are so thin they could be hard to remove.

Well that's all I can think of for pocket door problems that I have ran into for now. Until the next article have fun remodeling your home.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Vista Door Repairs

Building Handrails Books

Characteristics of an Effective Undercounter Water Filter

An effective under counter water filter can cost as much as $800. But, you can buy under counter water filters that are just as effective for less than $200. You just have to look for a product that does not include a reverse osmosis step.

Reverse osmosis or RO was originally designed for large industries and public treatment facilities. Eventually, it found its way into homes having brackish wells, as it was the only method to reduce the sodium content.

Today, companies like GE are producing less expensive "trimmed down" versions of the original designs for use in homes with publicly treated supplies. Now, some companies have gotten the bright idea that RO is a good idea for an under counter water filter. At one time, it was the only effective way to insure cyst removal, but that is no longer the case.

Under counter water filters with a submicron particle-filter can remove more than 99% of all cysts, for a fraction of the cost. Ion exchange can be used to reduce sodium content for brackish wells. In under counter water filters, it is used to remove lead, copper and other metallic traces.

Lead, even at low levels, is bad for your long-term health. Copper simply spoils the taste. Minerals and electrolytes, on the other hand are good for your health.

If an under counter water filter includes a reverse osmosis step, it will spoil any naturally occurring mineral-content. Ion exchange "balances" the mineral content to get rid of hard-water problems, but will not affect a naturally occurring mineral content.

The $800 under counter water filters requires extensive maintenance, regular cleaning and replacement of three different cartridges at various times throughout the year. The brand that sells for less than $200 requires no maintenance other than replacing the dual cartridges every six months.

It comes with an installation kit and is relatively easy to install. The faucet can simply replace your sprayer or you can drill an additional hole in your sink. There are good, bad and mediocre products on the market. I would not buy from a company that does not provide complete product performance data.

I would suggest that you look for an under counter water filter that is certified by the California State Department of Health. To get that certification, a company must provide complete testing data from an independent laboratory, such as Underwriter's.

The National Sanitation Foundation will also provide certifications for companies that apply. Consumer Reports rates products annually and some under counter water filters receive the highest ratings.

Not too many companies make an under-the-counter system. So, that makes shopping a little easier. Now, that you know that you do not have to spend $800, you might also want to consider a showerhead system. Cancer-causing chemicals become airborne in the shower and chlorine vapors trigger asthma attacks. It's also bad for your skin and hair.

Hopefully, this information will help you find an effective under counter water filter and save money, too!

Stop drinking contaminated water. Find out which water purifiers gives you the safest healthiest water in your home.

Bathroom Contractor Safety - Remodeling Contractors

This article isn't about contractors using the bathrooms safely, it's about contractors working on someone's house, remodeling a bathroom. When working on any part of the home, a contractor and his workers should think and work safely on any project, but working in a bathroom with more than one person can become a contractors safety nightmare.

I was working in a kitchen one time, with 11 workers. I finally couldn't take it anymore and left the job. This did not make the general contractor very happy but it saved me from getting into a fight with one of the other workers. Whenever you're working in a confined area like a kitchen, bathroom, crawlspace or attic, safety is going to be a priority and should not be overlooked, because someone else wants to get the job done two days sooner.

Most accidents happen working in confined areas because of poor time management or someone else is in a hurry. Whenever you start to speed the destruction or assembling of any part in the house, you're increasing the risk of an accident. Most accidents happen from people in a hurry or poor planning.

As a bathroom remodeling contractor, you should plan properly and only use the minimum amount of people necessary to work in confined areas. If you are tiling the bath tub surround, one to two people is more than enough. If you're tearing the bathroom apart, during the demolition process, a maximum of three people should be used. During the demolition process, make sure your workers are thinking safely and clearly. Ripping a large piece of plaster off of the wall, that has wall anchors in it could grab a hold of something like an electrical wire or plumbing pipe. This of course could cause damage to the home, as well as a risk of electrocution.

Use your head when working in the bathroom and you will greatly reduce the possibility of any accidents. Accidents can easily be prevented my working cautiously on anything.

Bathroom Remodeling Contractor

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors

If you're really interested in learning more about remodeling, new home construction, home maintenance, home repairs and really want to get the nuts and bolts of home improvement. Visit our web site and select from the best-selling home building books on the Internet

Modular Home Construction Techniques

The truth, is that while modular homes have become more popular and can be seen dotting the landscape with far more regularity, most people are completely unfamiliar with modular home construction techniques. How is it that a modular home can be constructed so quickly and still retain their structural integrity and high over all level of quality.

Modular Home Construction Factories

By and large, modular homes are constructed indoors in a warehouse setting. In some factories some work may be done outdoors and in others the work may be done in it's entirety indoors on the factory floor.

An Assembly Line Process

They basically move down the assembly line in the same way that automobiles are built. Because modular homes are built on a steel frame and have their own wheels, they are simply pulled along to each work station by a forklift.

First Things First

It begins be constructing the steel undercarriage. This is then rolled onto the factory floor where the floor is next sheeted. After the floor is sheeted, measurements are taken and chalk lines are snapped to delineate where each wall will be placed.

The Walls are Stood in Place

In most modular home factories the walls are framed in a separate station and then brought to the modular home where they are stood and securely attached. After all the walls are attached, the plumbing, ductwork and electrical wires are all ran.

The Last Finishing Touches

Finally, the siding is applied, the finished flooring is laid down and all of the appliances and fixtures are installed. The very last thing that will be done on a modular home is a final exacting cleanup to remove any small spots and then it is given it's final inspection.

Written by Jayden Jefferson. Come over to my site to get the best articles on custom home construction plus prefabricated modular homes.

Who Needs Flood Insurance? - More People Than You Think

If somebody were to ask you the question, who needs flood insurance? The obvious response to that question would be someone who lives in a flood zone. Someone who lives close to the shore in an area known to be at risk for flooding. And while that's true anyone living in an area like that should have flood insurance, it may also be a good idea for people living in lower risk areas to get some flood coverage.

25% of all flood loss claims are filed in areas of low to moderate flood risk. Floods can happen even in areas that you wouldn't think would be at high risk. It doesn't always take a raging river overflowing its banks to cause flood damage. In a strong rainstorm the sewer system and storm drains can get backed up, become blocked, and then overflow. This can cause flood damage in areas where you would least expect it.

When floods do happen in a low-risk area too many people learn the hard way that flood damage is not covered by a standard homeowners insurance policy. To be protected from flood damage you need to carry additional insurance. Fortunately for the people who live in low to moderate risk areas flood insurance can be obtained at very affordable rates. The rates vary according to how much coverage you need and the level of risk.

If you live right on the shore of a river with a history of flooding then you will definitely pay more for your coverage and it may even be difficult to obtain coverage in that situation. If you live in an area of low to moderate risk the cost will be substantially cheaper. In lower risk areas you can get policies that will cover your home and its contents starting at just $119 per year in premiums. And considering that just 2 inches of water inside your house can cause over $8,000 worth of damage an inexpensive policy like this may be a good idea.

Learn the facts about homeowners insurance. How much you need and how to save money on homeowners insurance Educate yourself and protect your home and your financial well being from a potential disaster. http://homeowners-insurance-questions.info

Options for Improving the State of Your Roller Shades

Roller shades have been around for many years. Long ago in history many people had roller shades installed in their windows. Some of these roller shades still look quite beautiful. However it should be understood, and expected, that by now many of these roller shades that are in windows have deteriorated and gone by the wayside. Some of the wear and tear may be quite natural, including control systems that break down or fabrics that have ripped and torn or simply don't look right anymore. In any case, for most homeowners or business owners want to have attractive window treatments in their spaces.

Among the most common problems that consumers have with roller shades are failures in the control system. Sometimes roller shades "don't want to roll up anymore." Other times, they are stuck in position. For the first of these situations, you may simply find that if you can reroll your roller shade, you can tighten the springs and have it roll up better. In the case of a shade that is stuck, you must be very careful to not damage the fabric while trying to fix the shade. Many of these situations are complete losses, meaning that you will need to replace the roller shades. This is because the older control systems, those managed by springs, are no longer the commonplace or easy to obtain shades. So in the end, if you have a shade control system that is not working properly it is often advisable to get a new roller shade with the new control system.

Many consumers ask whether they can get a new roller shade control system for their existing fabric. This would seem the most logical way of reusing the same fabric and saving money by not having to waste that same fabric on a new shade. However given the updates and new fabrics that are available on the market, as well as the new methods of manufacturing roller shades, it is not as cost-effective and easy as many would think. It may not be so much of a waste, however, to buy new roller shades. For one thing the new fabrics are technically more capable. For another, the new control systems are substantially more durable and will protect your roller shade fabric so it will last much longer in your windows.

Another common roller shade problem is ripped, warped, or otherwise damaged roller shade fabric. The heavy use of vinyl coated fabrics, those that are typically called blackout, were substantially more common in the past. Those fabrics, unfortunately the lighter weight ones, were more often susceptible to ripping than modern-day fabrics, particularly those from woven polyester or other threads. The damages to these roller shade fabrics have often created ugly or less than presentable roller shades. Many consumers have wondered if it is possible to repair this fabric by replacing a section of the fabric. Unfortunately, replacing a section of fabric is not a possibility. However, some roller shade fabrics can endure a slight repair, like sewing or other repair. Beware though, excessive sewing may lead to an expanded problem. Often times, the sewing of roller shade fabric will simply delay the inevitable- the entire destruction of their roller shade. In the end, it is usually advisable for consumers to begin thinking about replacing roller shades when this type of deterioration begins.

Some roller shades will cause damage to the surrounding area. The scraping of a roller shade bottom rail against a window frame is not uncommon. Sometimes, this bottom rail, also called a hem bar, will run into a wall or otherwise run into a window frame. This type of damage can usually be corrected by making slight changes to the bottom rail like cutting it with a saw. Sometimes this hitting into a wall is a sign of other problems. A roller shade that is not properly squared up may have other damage to the fabric at the controls at the top of the roller shade. It is important to make sure that the roller shade is rolling up properly and that there are no other damages to the fabric or the control system.

While many consumers would like to try to repair or update or otherwise renovate their roller shades, it is usually considered advisable for simple replacement of that one shade or the several with problems. The new control systems will help your shades last longer and look more beautiful for a longer period of time.

Judith Persit is a student of interior design. She started in this direction due to a search for design options in window treatments. Ms. Persit writes about roller shades. Roller shades can be interesting, you can learn more about shades at her sponsor's website, with many pictures.

Cb44 Bolted To 4 X 4 Wood Post

How to Attach a Zinc Frame to Stained Glass

A zinc frame on stained glass panels is essential for structure and rigidity. The zinc frame is added once the design is cut, foiled and soldered. The process of adding a zinc frame is accomplished by following seven steps.

1. First, measure the length of zinc came needed for each side.
2. Then, decide if you want straight cuts or mitered cuts for the corners.
3. Using a came saw or a fine tooth hack saw, cut the zinc came to the length and angle you need. Initially, you may want to cut the pieces long then re-cut once you dry fit the came to the stained glass piece.
4. Once you have all the zinc came cut and fitted to your piece, insert the glass into the came channels and hold zinc in place using t-pins. If you are using Handy Hangers, you would insert them into the came corners during this step.
5. Now flux the corners of the came frame and all the solder seams that touch the frame
6. Then, solder each joint of the frame and the adjacent solder seams.
7. Once, the first side is done, carefully turn the piece over and repeat the process on that side.

To apply hanging rings to the zinc frame, lightly flux the ring and the area of the frame where the ring will be attached. The area in which you attach the rings should be where the zinc frame meets a solder seam. Next, solder the rings to the zinc frame. Be sure the ring extends over the edge of the frame. If you are going to add a wood frame to the stained glass piece do not attach rings to the zinc frame.

Hanging rings can be purchased or easily made by using copper or silver wire. To make your own hanging rings, wrap wire around a pencil or other object to get the diameter you need. Then simply cut it, making a small circle. If you need stronger rings, cut two or three lengths of wire and twist them together. The twisting can be done easily by placing one end of the strands in a vice and the other end into the chuck of a drill. Rotate slowly until the desired amount of twisting is completed. Then wrap the twisted wire around a pencil or other object and cut.

After zinc frame is attached, be sure to use flux remover and remove all flux residue.

Some areas of concern:

Please note that zinc frames are available in different sizes, widths. Each one, however, laps over the edge of the glass the same amount. So, the only reason for going to a larger width is looks. Additional strength may be gathered if your stained glass piece is extremely large. Any piece over 30" wide or tall should definitely be framed in the largest size zinc frame available.

Mitered cuts look better in my opinion, especially if you are not using a wood frame. Actually miter cuts are not that much harder to accomplish, so why not be professional in the first place? Small electrical frame cutters, 2" blade, are available for around $20. This is worth it in my opinion.

When mounting frame on your art work, be sure that all edges of the glass are secured into the full depth of the zinc frame. Otherwise, you will experience dissatisfaction after you solder the pieces together. As mentioned, T-pins are suggested to be sure and hold the frame tightly anchored to edge of the glass and deep into the channel of the zinc frame.

When soldering the corners or the seam lines connecting the frame, you will see a slight rise to the solder. It is common to see the actual solder at these points, but after patina is applied, these blend together and look fine. Be careful as to not build up too much solder at these locations or this may be highly visible when finished.

After soldering the first side and then turning the art work over to solder the second side, examine the frame to see that it is in the correct position before soldering. Sometimes it can get "adjusted" when you turn the piece over.

I highly suggest the using hanging rings that have been twisted together as these are much stronger and tend not to pull apart after the art work has been hanging for some time. I have experienced single wire hooks actually failing and a piece or two has dropped and broken. Save yourself grief (take it from me) and only use the twisted, therefore stronger hanging rings.

If using a wood frame, a better look is always produced by mitering the corners of the wood. Simple 45 degree cuts on the end of all frame members easily accomplish this. When mechanically attaching these pieces of frame, I strongly suggest the use of a good carpenter's glue and one screw for long term hanging safety. Additionally, wood frames come in all sizes, including width, thickness and specie of wood. Decide how you want to finish them, paint or stain. This will enable you to use the right wood for the right job and not end up painting oak wood. Oak is too expensive and beautiful to hide under paint in my opinion. Mechanical hanging fasteners that include screws into the wood should be used.

I started out as a stained glass admirer. After a class in stained glass, I became addicted. At first I made stained glass to decorate my homes, which lead to friends asking me to make stained glass for them. Now I am a full time professional making stained glass as well as instructing others on how to make stained glass. My studio is located outside of Chicago, Illinois. For more information on making stained glass or to sign up for my newsletter, go to http://www.creativity-in-glass.com

Room Additions

Home and Building Restoration - An Efficient Means to Preserve Your Investment

Money is getting harder and harder to come by these days and people should avoid unnecessary waste of funds. Losing value of one's property, be it a house, a condominium or a building because of neglect is one of the most common ways people lose out on their investments. Regular maintenance will decrease serious problems and structural damage to a house or building over the course of time.

Aside from increasing the value of your investment, regular maintenance and renovation to old real estate will add to your enjoyment of your dwelling. If you're using your property to generate income by renting it out, home and building maintenance done regularly will give you the privilege to keep your rates high.

The maintenance schedules for the different aspects of your property vary from monthly to every 6 months. Plumbing in your bathrooms and kitchens should be checked for problems every month as water damage can easily arise from leaks and clogs. The ovens, heating system and smoke detectors should be checked for proper operation every month also to avoid accidents and disasters due to equipment failure.

Every 3 to 4 months, the lawn or garden area should be rid of dead branches and other debris that can attract termites and other insects that can cause infrastructure damage. Making sure foliage and landscaping is in good appearance can also do a lot in preserving the value of your property. Intake filters for airconditioning units should also be checked for dirt and debris every 3 months to avoid overload and high energy consumption. The same thing goes with the refrigerator's condensers. The attic area should be checked quarterly as well. Drafts or holes in the wall can lead to bigger electric bills or further damage to walls and ceilings.

The roof which is the part of your property that protects you and your prized possessions from the elements should be maintained twice a year. Missing shingles or leaks should be taken care of right away. Drainage for rainwater should be free-flowing and devoid of drips or clogs. Blocked gutters and downspouts in roofs will eventually lead to water going into the structure and this is always a bad thing. Walls should be checked every six months as well for deterioration of cement, wood rot or paint peeling. This goes the same for the basement area. Dampness and termites can cause a great deal of damage undetected in dark, hard to access places if left unchecked.

Remodeling one's home is also a good way of adding value to real estate. It can also solve any issues with boredom or dullness when you've gotten tired of the appearance or ambience of your abode. Remodeling can be anything from repainting some rooms to change the mood or setting, to a complete structural renovation that requires a change in the layout of the house or building's floor plan.

When the job is as big and complicated as the latter, hiring the services of a contractor would be the best thing to do. Remodeling, if you lack experience and the technical know-how can be stressful and time-consuming. A good contractor can actually save you money and avoid cost overruns by giving you a clear picture of how big your budget should be, based on what you want to change in your property. They can also do the job faster by choosing the right materials for the job and take care of the necessary paperwork (some construction projects actually need permits), giving you time to go about your life- go to work and earn money or take a vacation while work is going on.

Maintaining a home checking for leaks and doing light troubleshooting can be done without the help of a contractor. Most light painting and leaky plumbing can be done with the help of a good DIY manual and the proper tools. Building maintenance however, unless you have the manpower for it is a totally different story. Major renovation and regular building maintenance necessitates the need to hire professional help.

Jo is an author and publisher for 'EBL Group Limited' (http://www.eblgroup.co.uk), a family controlled, award winning and skilled home and commercial builders stationed in Runcorn Cheshire. If you are searching for builders runcorn who are professionals in overall construction, maintenance and property improvement or have home and industrial upgrading and repairs requirement then you ought to take a look at EBL Group.

Porch And Handrailing

How to Build a Basement Bathroom - What to Know Before You Start

One topic that gets a lot of attention is how to build a basement bathroom. Many people find themselves wondering if finishing their basement will add value to their homes and improve their living space. Overall, the answer is yes. A home with a finished basement, including a basement bathroom, adds a lot of livable square footage without an enormous cost. If you've got a basement and you'd like to make it some place that's worth living, you'll be happy to know that finishing it and adding a bathroom can be surprisingly simple and inexpensive. You just have to know what to do and you have to have a good plan.

What's the difference between a finished basement and a remodeled basement? Finished basements change a bare area into a carefully constructed living space, often with separate room and all the amenities you'd expect in the upper parts of a house. A basement remodeling is usually a much larger project that requires more effort and money. Many older finished basements, done with low quality materials or those that are just plain wrong, can turn into remodeling projects. You need to know in advance what you're doing and what methods you're going to use. Knowing how to build a basement bathroom properly in advance is one key to keeping yourself from having to remodel it again later.

This means keeping organic materials out of your basement bathroom and basement finishing projects. Many non organic materials are also susceptible - avoid ordinary wall board in favor of moisture resistant board, for instance. You'll be willing to deal with the extra expense when you realize that using a moisture resistant board in your new basement bathroom and in the rest of the basement will keep you from having to deal with mildew and mold. After all, you only want to build your basement bathroom once!

If you're not sure how to build a basement bathroom, or you know how to do some of the work but not all of it, stop. That doesn't mean you can't get into your dream finishing project. It does mean that you should enlist the help of a professional to get through the parts of your project that you don't know how to deal with. Making it up as you go is a surefire way to end up with a basement that needs work down the road!

You'll need to make sure that your basement bathroom has the right plumbing and wiring, good flooring that won't warp or delaminate, wall materials and paint that will resist damp and mildew, and fixtures that are suitable for use in a basement. Make sure that your bathroom is well lit and well ventilated, too. You'll be happier if you build a room that's pleasant to use as well as practical, and basement rooms can often seem cave like. Good design can help counteract this tendency. If you learn how to build a basement bathroom before you get started, you'll have a much better chance of a successful finishing project.

Thomas Johnsen is the Author and Leading Expert on how to Build Basement Bathrooms and the creator of the publication Building Basement Bathroom 101. Visit the site now to find the easy-to-understand step-by-step guides on basement bathroom construction available online today.

Hire a Local Qualified Home Inspector to Do Your Home Inspections

Did you know that a newly constructed house needs aresidential inspection performed on behalf of the home buyer? Even buyers of older homes often forget to have a home inspection or even know they can require a home inspector as a part of the pre-purchase process. Failing to have the inspection performed can relieve the seller from liability with any needed repairs, and leave you holding the money pit.

Did you know that a house inspection from a professional will usually consist of over 2500 different items being looked at. It is our job to completely evaluated almost all systems of the house from the roof all the way to the basement or crawlspace. Certified home inspectors have demonstrated their ability to locate structural issues, HVAC problems, plumbing and electrical issues, and even issues outside of the home that may have been missed even by the local building inspector. The cost of a home inspection is very low compared to the cost of almost any missed repair issues.

In areas like the humid Atlanta region there are issues such as water leaks, black mold, HVAC condensation, and leaching that may not be applicable in other areas. In fact each area of Georgia is different so if buying a home in North Georgia it is important to work with a reliable residential inspection specialist who has experience in the North Georgia area. After all, would an inspector from South ofAtlanta know how to look for roof damage caused by snow on a home in Ball Ground? Not likely. Keep it local and find a home inspector to provide a home inspection on your nexthouse or investment property. Every area has it's own set of issues related to the climate alone.

David Lelak is the owner/home inspector for IHI Home Inspections in Atlanta, GA. He is a Certified Atlanta home inspector, a member of Nachi and has been in the residential construction industry for over 20 years. My job is to protect one of the biggest investments you might ever make. So when I do a home inspection I inspect the property as if I were purchasing it for me and my family. Your families safety is my biggest concern and I want customers for life. Visit my website today at http://www.ihihomeinspections.com to schedule your inspection online.

Editorial services provided by my friend Ken Cook http://www.icobb.com

Plaster And Drywall Cracks

Moisture Against Gravity - Destroying Walls

Well I'm going to start this article with a little information on a job I did once.

I had been repairing a rental house for one particular homeowner for about three years when all of a sudden I got a phone call from him telling me the rental house was destroyed and he had never seen nothing like this. He sounded so upset over the phone I told him I would meet with him immediately.

On my way to the house I was trying to get an idea in my head what the house was going to actually look like. Since I have been repairing rental properties for over 20 years at this point of my career, nothing really shocked me. I had pretty much seen everything that could possibly be done to rental property by the tenants that lived there. There is a lot to be said about taking care of it as if it were your own.

He was waiting for me at the front door and he looked thoroughly disgusted. As I approached him he was shaking his head and yelling at the same time can you believe these people, can you believe what they did to my house. I was expecting to see the front door ripped off and all the windows broken out of the house but this wasn't the case.

As he led me through the home and I could see the usual clothing on the floor, broken cabinets, a few holes in the walls and of course that awful smell of mold and mildew. All of this stuff was nothing new to me because I'm the guy they call to fix it when a renter moves out of the property.

As I entered one of the bedrooms I got my first glimpse of something I had never seen before but heard stories about and could not believe my eyes. Looking at the walls in the bedroom about 3 feet from the floor all the way around the room, the plaster was soft. It actually looks like someone shoved popcorn into the wall somehow.

The homeowner wasn't even looking at this because of the rest of the damage in the home. I started to explain to him I'd never seen nothing like this but I could guess it was water damage somehow since the plaster was soft. I could actually stick my finger into the wall, that's how soft the plaster was.

My first thought was to examine the carpeting a little closer to see if it was wet. Well it was damp but it wasn't as wet as I would've expected it to be with the amount of water in the walls. With a little more home inspecting I had found the culprit, it was a broken water bed. The water bed was now in the backyard looking innocent.

I couldn't believe a broken water bed could do this much damage so I looked around for broken or leaking water pipes and could not find any. The other bad news I had to inform the homeowner was that the water had damage the bathroom and closet walls also. These walls of course were on the other side of the bathroom walls that were damaged.

Well the point of this story is that water will actually wick its way up or worked its way up into a wall. I had to remove 4 feet of drywall all the way around the room. The plaster or drywall actually acts like a sponge pulling the water into the walls. Hard to imagine that gravity in this case seems to reverse. I would've never thought that water would've traveled so far up the walls creating that much damage.

To repair the rental property I had to remove the damaged drywall, remove the carpeting, dry the wood framing out and put the whole thing back together.

I'm still amazed and will remember that project for as long as I live.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Water Damage

New Versus Old Lumber - Structural Failure

During my 30 years of remodeling and building new homes. I have ran across quite a bit of structural framing failures. I find myself answering this question a lot when explaining to a homeowner about the structural failure I am repairing on their home, "Why Didn't They Use Better Lumber" or " Why Didn't They Use Larger Lumber." I really have a hard time answering these questions because I honestly don't know the answer.

However I can try to use some logic and reason to give these people an answer that seems to make sense to both of us. Why didn't they use better lumber, quite simply because, with most older homes that were built before the 1970s they actually do have better lumber. Now you're probably thinking how can these homes have better lumber when the lumber is old versus the new lumber used in a brand new house.

Most of the structural repairs I have made over the years has nothing to do with the lumber and whether it was new or old. A large number of these repairs were caused by neglect and poor maintenance.

The lumber in most older houses are from older growth trees. Some of these trees were extremely large and only the premium parts of the trees were used. The premium lumber is cut farthest away from the center of the tree. Now the larger the tree it makes sense that there will be more premium lumber.

A large majority of the newer lumber used in home construction comes from trees about 6 inches in diameter. Now you're probably wondering how can they cut a 2 x 8 piece of lumber out of a 6 inch tree. Of course they cannot, the larger lumber comes from larger trees.

Most 2 x 4's that are less than 8 foot long can be cut from these trees. This scrap or waste that comes from cutting these two by fours will now go into engineered building materials like particleboard, oriented strand board and engineered beams. Another name for an engineered been would be a paralam.

I hope you're starting to get the picture now when it comes to using new or old lumber. There are companies that are going into old logging rivers and retrieving old growth lumber. These were logs that sank to the bottom of the river's and were never retrieved because it was too costly.

The old growth lumber is quite expensive. Who's to say what problems we will happen in the future from the newer products created with modern day technology. When it comes to building houses it is not an exact science and as contractors we have been repairing the damage from poor engineering for years.

When I use the word poor engineering I am not pointing fingers at engineers. We now have more knowledge about home construction then we had years ago.

New versus old lumber, who wins the battle. Only time will tell.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Structural Repairs.

Drywall Backing In Ceiling

Hiring a Contractor For Bathroom Remodeling - Remodeling Contractors

Well here's the age old question, how do we go about finding a decent bathroom remodeling contractor.

Here's some things you will be looking for in a contractor.

1. Is Your Contractor Fair and Honest?

2. Does Your Contractor Have Experience Remodeling and Designing Bathrooms?

3. Can You Actually Find a Contractor Who Will Complete the Job in a Timely Manner?

4. Do You Think the Workers Will Be Able to Clean the Job up Daily?

5. Will the Contractor Show up on Time?

6. Is the Contractor Going to Work At Least Eight Hours a Day?

7. Does the Contractor's Crew Have Experience?

8. Is Your Contractor and His Crew Courteous?

If you find a contractor for your bathroom remodeling project that has answered yes to all questions above, hire that person immediately. Most contractors can sincerely answer yes to half of the questions above. If you're looking for the ultimate bathroom remodeling contractor, you could be searching for quite a while, you're looking for some one that is competent and you feel comfortable with.

When hiring a contractor, look for someone who has your interest in mind first and not theirs. Find someone who is willing to help with the designed process of your bathroom and the remodeling. If you find a contractor to be arrogant or controlling, there is a good chance, your bathroom might not turn out the way you envision it.

When hiring a contractor for your bathroom remodeling project or any home improvement project, the most important thing to keep in mind is, whether or not you feel comfortable with this person or not. Never hire a contractor you're not comfortable with.

If a contractor is referred to you by someone you trust, this does not guarantee you will be happy with the bathroom remodel. Most referrals that I have gotten over the years are like rolling the dice, I believe I would have done just as good picking a name out of a hat.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Windows In Framed Exterior

Fixing a Speaker Cabinet by Replacing a Home Theater Speaker

When it comes to great audio sound, there is no part of a home theater that is more overlooked that the speaker cabinet. It is the very last link in the sound chain and controls the final way you hear everything. The speaker cabinet reproduces the tone as sound waves in the air which creates the subtle differences in sound. What happens when you have a blown speaker in one of your cabinets? Do you fix it or just buy a new one?

Usually the answer to this question is a wholehearted yes, simply for the reason that those cabinets were built with your speakers in mind. That is what they designed for. Think about the amount of math and engineering that was involved in building the cabinets with a certain amount of air space in mind. These cabinets were tuned specifically for those old speakers. Installing other speakers in there will not sound the same as your old speakers.

Here is a simple step by step process how you can remove the bad speaker from the cabinet and repair it.

• Take the speaker cabinet you'll be working on and set it on its back to remove the speaker grille. Some grilles are different than others. Some simply pop into place, while others are secured in with screws visible from the side or front of the cabinet.
• Now that you have the grill removed, you'll next unscrew the first screw from the bad speaker, and then the screw opposite the first one. All of the screws need to be removed in an opposite pairs order.
• Now, carefully list the speaker out of the cabinet. It will still be connected by wires to the other speakers and the head unit. Some are attached by two wires while others by four. There should never come a time when you remove a speaker and there is only one wire. If this you see this is the case then you may be lucky and the speaker is just disconnected and not blown out.
• Now take those wires hanging out the back and pull them out of the speaker tabs using the plastic connectors. Never pull on the wire itself. You'll end up damaging it. Those tabs should be color coded to help you distinguish between the positive (red) and the negative (black) wires. If they aren't, then simply label them with a marker before you remove them. Be careful not to let the wires fall back inside the cabinet once they are removed by taping them to the sides.
• Double check that the removed speaker is in fact blown and dead by determining the resistance between the two positive and negative connection tabs. If you get a read out on the meter of less than an ohm or more than twice the impedance rating, you have yourself a bad speaker. If you get a reading between the two good zones, then there shouldn't be anything wrong with the speaker. One other way is to lightly press on the center of the speaker cone. The speaker is blown if it makes a scratchy sound or does not spring back to its original shape.
• Now that you have your new speaker ready to go, you'll need to reconnect the wires by pushing the connectors onto the matching tab. Set the speaker into the mounting hole and replace the screws in that same opposing pair fashion as used earlier.
• Lastly, you are going to tighten all those screws, replace the grille and return the speaker cabinet back to its upright position.

Electra Warehouse does not only offer mobile electronics, it also carries brand named pro DJ equipment and home audio equipment. Electra Warehouse strives to give each customer a great one stop shop for the best bargain mobile, home and pro dj electronics. Visit them at http://www.electrawarehouse.com.

Advantages of Framing With Steel Studs

I have heard all sorts of stories over the years of the advantages in framing with steel versus wood studs. One time I even heard you could build an entire house with the amount of recycled steel from a large automobile such as a Cadillac. I find this hard to believe unless you're building a very small home.

My personal favorite for framing with steel studs is that they are extremely straight. I have built nonbearing partition walls using 12 foot 3 1/2 inch wide steel studs and after the drywall you can lay an 8 foot level to check it for straightness on the wall with amazing results.

If you use 3 1/2 inch wide steel studs with 5/8 of an inch drywall you will get an extremely durable and sturdy wall. Framing was steel studs is common in office renovations or remodeling. Most of the steel stud framing is done via the drywall contractors.

Steel studs and termites do not mix. You'll never have to worry about these little buggers or other uninvited house pests damaging your walls.

Over the years I have heard stories that steel framed buildings are earthquake and fire proof. They might be more resistant to fire than wood but keep in mind when metal is hot enough it will bend and warp making it unusable.

When I hear people talking about a fireproof building built with metal framing components my first thought is all of the other materials used in building the house that are not fire resistant. Don't get a false illusion when buying a house framed with steel studs and think it is 100% fire proof.

As far as steel framed buildings being earthquake proof this is another story. I really can't comment too much on earthquake damage to a steel building. The problem with earthquakes is they seem to create fires. So even if you're building does survive an earthquake it could get damaged by a fire in the area.

I have framed more wood homes than steel homes over the years and my steel stud construction is limited to nonbearing partition walls usually located in office buildings. I love framing with metal because of its light weight and ease of construction.

I still love framing with wood. There is something about what framing that I have always loved and always will.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as

well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Framing Ideas

Building Homes and Out-Buildings From the Dirt They Sit On

Can a home or out-building be made from the dirt it sits on and still have a modern look.

We found a soil block machine that employs the age-old technology of using native soils to build homes and other types of structures, and combines it with the sophistication and acceleration of modern technology. The result is one of the most efficient and productive methods of construction available for the expanding demand for inexpensive and environmentally safe homes and out-building.

This machine is the modern-day answer for providing a means of significantly enhancing the centuries-old process of making soil blocks by hand or by other methods which are slow, crude, and cumbersome. The machine is versatile, cost effective to operate, and is easily maintained by a single operator. It is very light and can be hauled with a farm tractor or almost any other type of vehicle with a ball hitch. Once on site, the machine is easily maneuvered by manpower into the various production locations. Quite simply, it dramatically increases the speed and quality with which soil blocks can be made in the areas of the world where adobe style construction is a viable option.

This may be the answer many countries such as India and other developing nations are looking for when it comes to housing their growing populations. This is a greener more ecologically sensitive option to high impact building methods. This machine was very simple to operate. Know by trade as the Village Builder, it was producing approximately 180 bricks per hour.

Blocks produced by this machine can be varied in thickness and can be used for construction as soon as they are made. The basic building block produced by the machine has an average weight of about 8 pounds (3.6 kilograms), and is capable of producing most of the walls of a small house in just a few days. After the blocks have been placed, they may be painted if desired.

We found that the Blocks that are produced by this machine are significantly more dense and stronger than those that were produced by the centuries-old method of making blocks by hand.

How it works. It is rather simple. The machine is loaded with dirt and then you add a liquid that is diluted with water to the dirt. That liquid is a polymer. Once it is hard it will not revert to a liquid state. This mixture with the dirt becomes one solid monolithic hard, water resistant, bug resistant, brick. Turn the machine on and out come the ready to use bricks. You simply pick them up off the small conveyor and put them in place. Fast and Simple.

For those that are working in countries where home construction is an issue, this machine may be the answer to many of prayers. For those that want to find a greener more ecologically sensitive method of building this is it. We tried the machine and found it will do the work of twenty men in one hour and the end result was a product that can be used to build a house or out-building from the dirt it sits on and still have a modern look, without the modern cost of construction.

Kurt Tompkins is the inventor, of the Bedfan personal cooling system for night sweats and menopause hot flashes. He is researching ecological methods of dust control, soil erosion, soil stabilization and alternative building methods. Further information about the Block machine can be found at soilscontrol-usa.

Home Building Books

Dangers Using Wood Stair Cleats - New Stair Construction

I would imagine most people don't even know what it wood stair cleat is, in construction we have so many words that describe the same thing. A stair cleat is another word for a thread bracket. In other words it's the part of the stairway that connects the stair stringer to the stair step. These have been used for years and over time, most of them will develop the same problem.

Most wood stair cleats loosened up and create a safety hazard. If the stairs are located outside in extreme weather conditions, for example, if it rains or snows a lot, extremely humid humid weather, or extremely hot and dry temperatures, your staircase might not last that long, if it is or isn't maintained properly. It's not a bad idea to use steel or concrete for stairways in these climates.

If you're ever walking up a set of stairs with wood cleats and the stair steps feel a little loose or wiggly, make sure you examined the stair cleats for safety. It's not uncommon for someone to be walking up or down a set of wood stairs and having the stair step or tread giveaway because the wood cleats has loosened.

If the wood stair cleats are nailed to the stair stringer, the nails can loosen up, causing it to become loose, as you walk up and down the stairs applying pressure to the stair cleat, this will create movement in between the stair step and the stair stringer. This could cause the cleat to crack, break and separate the connection between the stair step in the stair stringer.

I would suggest using metal brackets instead of wood cleats. The metal brackets will not crack or disintegrate like some wood cleats. Stair building brackets of course can loosen up and should be maintained regularly.

If you decide to use wood stair cleats, I would suggest using screws instead of nails and drilling holes in the wood stair cleats, most of the time this will prevent cracking the cleat. Try to use a thicker material for the stair cleat, for example using a 2 x 4 with lag screws and washers would be better than using a 1 x 4 with nails.

If you're walking up a set of stairs and a stair step feels loose, contact the owner of the property and let them know, they have a problem with their staircase.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more stair building books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Remodel Your Home With Cellular PVC - Versatex, AZEK, Certainteed, and TREX

As many of our homes age, maintenance, rot, and replacement become the three principles we live by. Our siding gets replaced, our windows rot out, and our trimboards deteriorate in front of our very eyes. Many times it takes 15-20 years for these effects, but replacing them can be a financial nightmare and can cost us a lot of time and grief. It's often much more economical to take the cheap route and go with the cheapest materials to replace these problems. However, you should consider a few factors to help you make your decision.

First off, homes appreciate in value, so using more expensive materials will often increase the value of your home. If you plan to live there for a while as well and enjoy your new siding, windows, deck, etc. then you may wish to spend a little bit more money for a more permanent solution that lasts and also puts value into the home. No rot composites and other revolutionary materials like cellular PVCs are breaking into the market as newfound alternatives boasting to last a lifetime. Many of these materials have the look and feel of wood too and offer paintable options that other materials like vinyl seem to lack.

The problem is wood is that inevitably it can result in problems. Usually within 10 years signs of rotting, cracking, and peeling have begun to set in. Without repainting over these exposed areas, sunlight and rain will expedite the rot process and lead to other problems such as mold and moisture in the house. It can also lead to higher energy repairs as well. Having good materials almost always save you more money in the long run. They're also selling points if you're trying to sell your house during a housing recession.

Common cellular PVC materials are Versatex, AZEK, and Certainteed. They are commonly used for trim replacement, rotting windows, and even window flower boxes, where wooden flower boxes are notorious for causing problems. Composites like TREX offer composite decking options allowing the look of unpainted wood that lasts much longer. Sidings such as Hardiplank are nice alternatives which last much longer than your traditional wood siding and can pay dividends in the long run. No matter what your budget is, make sure that you don't choose a material just based on cost alone. You should consider all the factors that are important!

Matt Buquoi is the owner of Flower Window Boxes, a window box company that specializes in affordable no rot window boxes. They manufacture and sell direct pvc window boxes which are 100% rot free and impervious to moisture. These no rot window boxes have been featured on The Today Show as "the last window boxes you will ever buy." Please visit their website for more information on affordable no rot solutions.

Home Building Books

The Wonderful World of Shutters

If you're looking to give your home an updated look, on the inside or the out, make sure you look at shutters. Whether you need exterior wood or vinyl, or if you're looking for interior window shutters, they are a very easy, and usually affordable way to give your home added interest and elegance.

Interior window models have become the decoration of choice for most homeowners and interior designers. When it comes to covering wide expanses of windows in home nothing works as well as interior wood shutters. They allow you to control the amount of light coming into your home. Floor to ceiling windows can be covered with 3 or 4 louver sections that move independently. This means that bottom louvers can be closed to allow for privacy, and upper louvers can be opened to allow for light. You can't do this with vertical blinds.

If you're looking to update the outside of your home think of exterior wood shutters or exterior vinyl. Actually, today's faux wood products are so very realistic there isn't any reason to buy real wood. Composite exteriors are made of virtually indestructible poly vinyl that will never need care. This product won't fade or chip, crack or peel. Poly vinyl holds up to moisture.

There are many different types of decorative and operable shutters available on the market. The most common are Board and Batten, Raised Panel and Louver. You can also find variations on these themes. There are a lot of companies that offer custom designs so that you can mix and match different styles.

Of course you can purchase operable shutters if you wish. You just need to measure very carefully so that the shutters will meet in the center of the window. Bermuda shutters are very popular at homes on the shore as they simply drop down and cover the entire window.

When you purchase make sure that you have the necessary hanging hardware. You may also want to check into decorative hardware and accessories depending on whether using exterior or interior products.

Any homeowner who wants to add to the curb appeal of their home, or who wants the perfect window treatment for the inside of their home should check out shutter styles.

Read more from Simon Harris at http://www.shutter-world.com

Remodel Bathroom Ideas - A Self-Help Guide

The idea to remodel your bathroom can come as an idea to augment your house value or simply to make it into the haven you have always wanted. Whichever reason is yours, to make everything you do to implement your remodel bathroom ideas fully realizable, you should look to these inexpensive and easy-to-install ideas.

When you remodel a bathroom, you can change aspects from lighting to fixtures. In the bathroom you want to have adequate lighting. Some ideas would be changing harsh lighting with staged lighting, or even lights at the vanity and near the bathtub. Changing lighting won't break your budget, as a lot of fixtures can be inexpensive. You can also save money by doing it yourself. Yet, know when to hire outside help, such as a local remodeling contractor. You can check yellow pages, and online to find one near you. All you need to do is Google "local city remodeling" and see what comes up.

When remodeling a bathroom you should always listen to the advice of your contractor on what type would be best suited for your project. You are paying a remodeling contractor to do the work, he/she should have the best knowledge of what will look the best with the decor and usage of such things as shower heads, faucets, lighting and other fixtures. Chances are he/she may also be able to get better quality and pricing on all fixtures especially if he/she is well established. Not to mention the contractor will also know what types will really increase the value of your home.

Buy more tiles than you believe you will need in order to line the floor, if not the walls. It will be far more costly and time-consuming to locate tiles that even come close to a replica of yours if you search for them years after buying the initial batch. For the duration of your homeownership, you'll probably require spare tiles if single ones are damaged. Also, excess tiles may be transformed into accent items for your bathroom, such as decorations by the light switches, bathroom tissue dispensers, mirrors, and even towel racks. Once again, the local remodeling contractors are experienced and will attend to these pre-planning items for you.

To gain more space in the bathroom replace your big vanity with a small pedestal sink. You can add more shelves in other parts of the room. A pedestal sink will take up less space and make your bathroom look bigger than before. Avoid filling up expanded space with items you will not use. Do you really need that many different shampoos? You should only need a small amount of space for these products like the top of the toilet or built in shelves.

With the knowledge of various remodeling bathroom ideas from luxury developer Pendleton Homes out of Mclean Virginia you can re exam your own ideas and learn how to create your own remodel bathroom ideas. Pendleton Homes has great advice to help you with remodel bathroom ideas, these ideas also include pictures in which you may want to mix up a couple to make it look as if you were the one who had ther great remodel bathroom idea. Just learning a little might even make your new bathroom the envy of many and your sanctuary of pleasure.

As you consider remodel bathroom ideas, make sure that the lighting is appropriate. If you're thinking about upgrading your bathroom, something as simple as installing new steel fixtures, such as showerheads and faucets, can breathe new life into your old restroom. Start by finding a reliable agent, who will be able to assist you in completing the project. The luxury developer Pendleton Homes have great ideas to help you with remodeling options, these ideas also include pictures in which you may want to mix up a couple to make it look as if you were the one who had the great remodel bathroom idea.

House Attic Books